|
|
AOI Inspection with AI Inference System
|
|
Automated optical inspection (AOI) is an automated visual inspection of printed circuit board manufacture where a camera autonomously scans the device under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is commonly used in the manufacturing process because it is a non-contact test method. During the manufacturing process, defects could be introduced and harmful to the quality. It is necessary to classify the defects detected by AOI machine appropriately especially killer defects. The higher accuracy to classify defects, the less cost spent on review and repair station. It is implemented at many stages through the manufacturing process including bare board inspection, solder paste inspection (SPI), pre-reflow and post-reflow as well as other stages.
|
New Products
|
♦PUZZLE-A002 | Network Appliance
- AMD R-Series RX-421ND quad-core 2.1 GHz processor
- 2 x DDR4 2400MHz Non-ECC UDIMM, up to 32 GB
- Support 6 x GbE RJ45 via BROADCOM BCM 5720
- 1 x RJ45 Console, 2 x USB 3.1 Gen 1 (5Gb/s), 2 x USB 2.0, LCM
- 1 x PCIe x8, 2 x 2.5” SATA drive bay, 1 x PCIe mini, 1 x SD slot
- Support two PCIe x4
- Specifications - Product News - Brochure
|
 |
|
♦ iSwitch Series | Industrial Ethernet Switch
Including:
- IIoT Wireless 4G LTE Router
- Industrial Cellular PoE Routing Switch
- Industrial Cellular Wi-Fi Boost PoE Routing Switch
- Outdoor IEEE 802.11a/n Wireless AP
- Rugged L2/L3 PoE Switch
- Rackmount Ethernet Switch
- Catalog
|
 |
|
|
|
|
|
.png)
.png)
.jpg)
